Feature of fishing in the middle of summer is that big fish in reservoirs and lakes prefers to feed in relatively shallow areas, spaced at a good distance from the shore. The lack of effectiveness of the bottom snap can be connected and by the fishing conditions, and with very careful bite of the fish, as well as the fact that the pack, for example, bream is not in place.
When a flock of fish is constantly moving, it is difficult to hold in the selected fishing spot. You can activate fish bait, but to keep in place for a long time could not. A very common variant of fishing, when the fish are in the bays, whose shores are overgrown with bushes and trees. You can go into the water with a long luffing rod or plug. Even put up a platform and create maximum comfort, but then you’re tied to the location and about any chassis, and especially about the persecution of the departing swarms of bream, may not be considered.
One option could become a hot fishing with the so-called match tackle, or gear for long casting float snap. But in order to efficiently catch a particular gear, you need to construct it correctly.
The rod is chosen primarily for power, that is, based on the weight throw snap, not fish size. Manufacturers usually specify what is the maximum weight of equipment is designed specific rods, but there are nuances. On models with obviously great power is usually applied markings “to 25 or 30 grams”. Such rods are quite suitable for angling not only float, but with sbirulino. Another case of models which are really designed for 25 or even 20 g. it is better not to overload the more severe snap-ins. The advantage of the rods with the exact marking is that they have systems specifically designed for fishing with a sliding float. Such rods are not the cheapest, but allow you to work with snap-ins accurately and significantly save power angler.
At the time, I am very opposed to telescopic models for long casting, but with the advent of some new products opinion has changed, especially after I stopped competing and started to catch in “inconvenient” places.
Very often the most promising places are in wooded, sometimes it is difficult to be followed by the Bank or the wall of the cane. Catch can with individual points, and move on to another fishing location not turning the gear, unreal.
The question immediately arises about the length of the rod. A longer rod can cast “blind tooling, that is tooling with fixed float. But longer rods are awkward, when on the shores of the many obstacles restricting the actions of the angler — bushes, trees.
Increasing the length of the rod does not lead to a noticeable increase in casting distance. The longer the rod, on the one hand, gives the snap a large initial velocity due to greater leverage, and on the other hand, a long pole, particularly powerful, is more difficult to disperse. A long rod is easier to control the caught fish at a distance from the shore, but in the time of the adoption of the big fish in your net while stopping excessive length, especially in a confined space on the beach. A long pole is slightly more versatile because it allows you to use it for fishing classic wiring and Bologna, but a short rod you can fish for perch and Chub on light lures and spinners.
I went through dozens of models match telescopes and decided on the model of Italian production with a length of 3.9 m with real dough 15 g. For reference, the own weight of the rod 151 g
The rod is equipped with a spinning reel with a sufficiently large capacity spool. Long distance fishing requires that the coil was fast, with the speed of winding fishing line not less than 75 cm for one revolution of the handle. If a doubt arises in the selection of a smaller or more larger coils, I would have preferred more, but be sure to pay attention to the balance of the rod and reel. That is, in what place is the center of gravity of the rod is equipped. The closer it is to the side of the spool, the better, because you will be less tired arm. The pace of perezapisi usually high, so properly balanced tackle each casting to save your strength.
Brake type coil, front or rear, plays no role, only brake adjustment was smooth. It is desirable that the coil was indispensable for fine woods the spool with reverse cone protivogerpetical line and instant anti-reverse.
Personally, I often use as my main so-called flood line, that is the most durable and well calibrated. This scaffold is in the payout to 50 m, which is sufficient. What is more important. Good fishing line with a diameter of 0.125 mm has a tensile strength of about 2.5 kg, which is enough for fishing, but for such diameter of the line needs a shallow spool. Tackle goes beyond the budget, but it becomes very convenient and functional.
Conditions for running fishing along the shore primarily between the depth and the direction of the wind. These differences define the limits of use of snap-ins, sliding and fixed floats. With a sliding snap-in makes sense to fish when the fish is three or more metres, but more often the depth of fishing does not exceed two meters. The descent can be even less when carp and roach walk at half depth.
Floats with internal loading, starting with the 5+1 g to 5+, 10 g, cover almost all possible technical options of fishing. Value domestic shipping is determined by depth of fishing, and the total weight is dictated by the distance and weather conditions.
Connects the float with the fishing line by means of a fastener and a swivel built into the keel of the float. Weight shipping weight is shipped, the locking elements, the shepherd and the hook. I prefer to use as the main olive sinkers tungsten alloy, which is attached to the fishing line using two silicone kembrikom. Above the olives, at a distance slightly greater length of the float, placed a small pellet. It protects the float from impacts on the olive.
A mandatory part of the snap is the snap bead of the float, which limits its upward movement, that is, detects the amount of descent. The retaining bead can be easily replaced, slip knot from the same fishing line as the main line, if the hole in the clasp close to the diameter of the line. I believe that the optimum distance from the shepherd boy to the olives about 60 cm, and from olives to float 20-30 cm
It is very important to choose the right weight of the shepherd boy. This will depend on the sensitivity of snap to the bite and number of bites. If the herdsman is composed of several pieces, then in any case, between them there should be clearance. Otherwise you will get tired of tie-ins with each casting.
If you need to change the design in the process of catching, that is to replace the float for more or less lifting with a different redistribution of domestic shipping, then do just. Remove the float with fasteners and touches another float. Replace the main olive sinkers, it is possible by using additional pairs kembrikom just add another olive. Removing part of the inner shipping float, finally regulate the snap. As a result, we do not touch the hook, the leash, the shepherd and the knots on the fishing line.
The lighter the float is, the less it will create a noise when falling on the water, and it is in terms of surface fishing is very important. But it is important not to lose accuracy and casting distance with too soft a snap. If you have a choice between spherical and oval floats, I prefer the latter. Floats oval, and the more elongated form, fly farther, more accurately and, I think, create less noise during landing.
So a collision with unusual fishing conditions, we decided to do some revision of views and to complement your Arsenal telescopic match rods.
